Krishna Shankar

Senior Lecturer in Aero/Mech Engineering
Senior Lecturer

Research Interests

  • Structural Health Monitoring, Vibration Analysis
  • Testing and Analysis of Advanced Composites Materials
  • Impact Mechanics of Polymeric Foams, Composite Laminates and Sandwich Structures
  • Vibration and Dynamic Response of Structures
  • Finite Element Simulation
  • Fracture Mechanics
  • Biomechanical Testing and Modelling
  • Fatigue and corrosion of mechanically fastened joints, Corrosion Fatigue

Publications (as of May 2018)

Refereed Journal papers: 77, Conferences: 120


Teaching Experience

  • Engineering Structures, Structural Mechanics
  • Non Destructive Inspection
  • Structural Integrity Assessment
  • Fatigue and Fracture Mechanics
  • Composite Mechanics


Additional Experience

  • Four Years Aircraft Design experience as Stress Analyst in Design Bureau, HAL, Bangalore
  • Six years of post doctoral research experience at University of Toronto and National Research Council of Canada in Composite structural analysis and testing
  • Twenty three years of Academic Teaching in UNSW Canberra


Consulting Interests

Mechanical Testing, Material Characterisation, Impact Testing and Simulation, Non Destructive Inspection, Finite Element Modelling

Conference Abstracts
add
Aryal B; Morozov EV; Shankar K; Thabet A; Moore PJ, 2017, 'Effects of Ballistic Impact Damage on Mechanical Performance of Composite Honeycomb Sandwich Panels', in ICCS20-20th International Conference on Composite Structures, ICCS20 – 20th International Conference on Composite Structures, Paris, France, pp. 98 - 98, presented at 20th International Conference on Composite Structures, Paris, France, 04 September 2017 - 07 September 2017, http://dx.doi.org/10.15651/978-88-938-5041-4
2017
Conference Papers
add
Wang H; Tan H; Shankar K; Hazell PJ; Morozov EV; Li Z; Escobedo-Diaz JP, 2019, 'Experimental investigation and mesoscale modelling of textile composites under high-velocity impact', Melbourne, Australia, presented at 22nd International Conference on Composite Materials, Melbourne, Australia, 11 August 2019 - 16 August 2019
2019
Aryal B; Wang H; Morozov EV; Shankar K; Hazell P, 2019, 'Effects of Impactor Mass and Impact Velocity on the Damage Induced in Carbon Fibre Reinforced Laminates', in Aerospace Structures Impact Dynamics International Conference, Madrid, Spain, presented at ASIDIC2019, Madrid, Spain, 04 June 2019 - 07 June 2019, http://asidiconference.org/
2019
Aryal B; Morozov EV; Shankar K, 2019, 'Structural Response of Ballistically Damaged Composite Honeycomb Sandwich Structures', in Twenty-Second International Conference on Composite Materials (ICCM22), Melbourne, Australia, presented at Twenty-Second International Conference on Composite Materials (ICCM22), Melbourne, Australia, 11 August 2019 - 16 August 2019, https://iccm22.com/iccm22-proceedings/
2019
Mostafa A; Shankar K; Smith ST, 2019, 'Numerical modeling of progressive damage of composite laminates', in APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures, Gold Coast Australia, presented at Seventh Asia-Pacific Conference on FRP in Structures (APFIS 2019), Gold Coast Australia, 10-13 December 2019, Gold Coast Australia, 10 December 2019 - 13 December 2019
2019
Mostafa A; Shankar K; Smith ST, 2019, 'Numerical determination of ballistic limit velocity of stainless steel woven wire mesh', in APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures, Gold Coast, Australia, presented at APFIS 2019 Proceedings - 7th Asia-Pacific Conference on FRP in Structures - Surfers Paradise, Gold Coast, Australia, 10-13 December 2019, Gold Coast, Australia, 10 December 2019 - 13 December 2019
2019
Aryal B; Morozov EV; Shankar K, 2019, 'Structural response of ballistically damaged composite honeycomb sandwich structures under multiple ballistic impacts', in ICCM International Conferences on Composite Materials
2019
Aryal B; Wang H; Shankar K; Morozov EV; Hazell PJ, 2019, 'Compressive behaviour of carbon fibre reinforced thermoplastic lattice structures', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, pp. 480 - 485, http://dx.doi.org/10.1201/9780429426506-85
2019
Li Z; Wang H; Aryal B; Hazell P; Khennane A; Shankar K; Escobedo-Diaz J, 2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, South Africa, presented at 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02 September 2019 - 04 September 2019, http://dx.doi.org/10.1201/9780429426506
2019
Li Z; Wang H; Aryal B; Hazell PJ; Khennane A; Shankar K; Escobedo-Diaz JP, 2019, 'Effects of impactor mass on pultruded profiles subjected to low-velocity impacts', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, pp. 623 - 627, http://dx.doi.org/10.1201/9780429426506-109
2019
Aryal B; Wang H; Shankar K; Morozov E; Hazell P, 2019, 'Compressive behaviour of carbon fibre reinforced thermoplastic lattice structures', in Advances in Engineering Materials, Structures and Systems: Innovations, Mechanics and Applications, Cape Town, South Africa, presented at 7th International Conference on Structural Engineering, Mechanics and Computation (SEMC 2019), Cape Town, South Africa, 02 September 2019 - 04 September 2019, http://dx.doi.org/10.1201/9780429426506
2019
Khaksar Z; Anavatti S; Shankar K; Ceruti A, 2017, 'Physiological and psychological response modelling of the helicopter pilot through vibration simulation', in 43rd European Rotorcraft Forum, ERF 2017, pp. 1441 - 1446
2017
Khaksar Z; Anavatti S; Shankar K, 2017, 'The vibration simulation at the helicopter pilot’s body segments in vertical direction', in Gruca A; Czachórski T; Harezlak K; Kozielski S; Piotrowska A (eds.), Advances in Intelligent Systems and Computing, Springer, Cham, Kraków, Poland, pp. 292 - 300, presented at International Conference on Man–Machine Interactions : ICMMI 2017, Kraków, Poland, 03 October 2017 - 06 October 2017, http://dx.doi.org/10.1007/978-3-319-67792-7_29
2017
Khaksar Z; Anavatti S; Ceruti A; Shankar K, 2017, 'The simulation of vibration at the supine patient’s body in HEMS', in 9th Australasian Congress on Applied Mechanics, ACAM 2017
2017
Ubulom IA; Fien A; Neely AJ; Shankar K, 2016, 'Turbine blade life prediction using fluid-Thermal-structural interaction simulation', in Proceedings of the ASME Turbo Expo, AMER SOC MECHANICAL ENGINEERS, Seoul, SOUTH KOREA, presented at ASME Turbo Expo: Turbine Technical Conference and Exposition, Seoul, SOUTH KOREA, 13 June 2016 - 17 June 2016, http://dx.doi.org/10.1115/GT2016-57048
2016
Ramakrishnan KR; Shankar K; Hoo B; Fien A, 2016, 'Investigation of novel bagasse fibre hybrid crash barriers using numerical simulation', in ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials
2016
Khaksar Z; Anavatti S; Shankar K; Ceruti A; Pratt H, 2016, 'The Vibration Impact Determination of the Helicopter Structural Components', in MATEC Web of Conferences, Shanghai,China, presented at 2016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), Shanghai,China, 21 October 2016 - 23 October 2016, http://dx.doi.org/10.1051/matecconf/20179507027
2016
Chowdhury MS; Krishna Shankar ; Andrew McKelvie ; Morozov , 2016, 'Damage Identification in a Composite Stiffened Panel with T Stiffeners using ERA/NExT: Simulated Approach', in Rik Heslehurst (ed.), 2016 Advanced Composites Innovation Conference, 2016 Advanced Composites Innovation Conference, Melbourne, Australia, presented at 2016 Advanced Composites Innovation Conference, Melbourne, Australia, 12 April 2016 - 14 April 2016, http://www.compositesconference.com.au/2016-composites-conference/speakers/peer-reviewed-steam/md-shakar-ullah-chowdhury/
2016
Wang HX; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2015, 'The effectiveness of combined gripping method in tensile testing of UHMWPE single yarn', in IOP Conference Series: Materials Science and Engineering, IOP Publishing, pp. 012109 - 012109, http://dx.doi.org/10.1088/1757-899X/87/1/012109
2015
Barnes R; Morozov E; Shankar K, 2015, 'STRUCTURAL OPTIMISATION OF THE EXTERNAL SHELL OF A LOW WIND SPEED WIND TURBINE BLADE', in Gomes JFS; Meguid SA (ed.), M2D2015: PROCEEDINGS OF THE 6TH INTERNATIONAL CONFERENCE ON MECHANICS AND MATERIALS IN DESIGN, INEGI-FEUP, P Delgada, PORTUGAL, pp. 1535 - 1536, presented at 6th International Conference on Mechanics and Materials in Design (M2D), P Delgada, PORTUGAL, 26 July 2015 - 30 July 2015, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000378595500271&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a29b250adbe88d1
2015
Ubulom IA; Shankar K; Neely AJ, 2015, 'Turbine blade life prediction using fluid-thermal-structural interaction modelling', in Proceedings of the ASME Turbo Expo, http://dx.doi.org/10.1115/GT2015-43071
2015
Ramakrishnan KR; Guérard S; Maheó L; Shankar K; Viot P, 2015, 'Development of a finite element model for the simulation of parabolic impact of sandwich panels', in EPJ Web of Conferences, http://dx.doi.org/10.1051/epjconf/20159401018
2015
Barnes RH; Morozov E; Shankar K, 2015, 'Evaluation of Simplified Loading Models for Finite Element Analysis of Composite Wind Turbine Blades', in Proceedings of the 20th International Conference on Composite Materials (ICCM-20), ICCM, Copenhagen, Denmark, presented at 20th International Conference on Composite Materials (ICCM-20), Copenhagen, Denmark, 19 July 2015 - 24 July 2015, http://iccm-central.org/
2015
Wang C; Shankar K; Fien A, 2015, 'Finite element simulation of impact response of wire mesh screens', in EPJ Web of Conferences, http://dx.doi.org/10.1051/epjconf/20159404033
2015
Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2015, 'Tensile Properties of UHMWPE single yarn at different strain rates', in Araújo AL; Correia JR; Soares CMM (eds.), Tensile Properties of UHMWPE single yarn at different strain rates, 10th International Conference on Composite Science and Technology, Lisbon, Portugal, presented at 10th International Conference on Composite Science and Technology, Lisbon, Portugal, 02 September 2015 - 04 September 2015, http://www.dem.ist.utl.pt/iccst10/files/ICCST10_Proceedings/pdf/WEB_PAPERS/ICCST10_Upload_91.pdf
2015
Ramakrishnan KR; Guérard S; Shankar K; Viot P, 2014, 'Drop tower experiments on Glass FRP sandwich plates with nano-elastomeric particles', in Nurick GN (ed.), 4TH International Conference on Impact Loading of Lightweight Structures (ICILLS 2014), 4TH International Conference on Impact Loading of Lightweight Structures (ICILLS 2014), Cape Town, South Africa, presented at 4TH International Conference on Impact Loading of Lightweight Structures (ICILLS 2014), Cape Town, South Africa, 12 January 2014 - 16 January 2014, http://icills2014.org/wp-content/uploads/2014/01/Karthik-Ramakrishnan.pdf
2014
Ubulom IA; Neely AJ; Shankar K, 2014, 'Heat transfer prediction of a turbine stage using fluid-thermal-structural interaction simulation', in Proceedings of the 19th Australasian Fluid Mechanics Conference, AFMC 2014
2014
Yu K; Morozov EV; Ashraf MA; Shankar K, 2014, 'Numerical analysis of the flexural behaviour of reinforced thermoplastic pipes for offshore oil and gas applications', in Heslehurst RB (ed.), Materials for a lighter and smarter world, Composites Australia, Newcastle, presented at Composites Australia and CRC-ACS Conference 2014, Newcastle, 07 April 2014 - 09 April 2014
2014
Ubulom IA; Neely AJ; Shankar K, 2014, 'Heat Transfer and Temperature Prediction of the gas turbine stage using fluid-thermal-structural interaction', in Alam F; Chowdhury H (ed.), Proceedings of the 19th Australian Fluid Mechanics Conference, 19th Australian Fluid Mechanics Conference, Melbourne, presented at 19th Australian Fluid Mechanics Conference, Melbourne, 08 December 2014 - 12 December 2014, http://people.eng.unimelb.edu.au/imarusic/proceedings/19%20AFMC%20TOC.htm
2014
Barnes RH; Morozov EV; Shankar K, 2014, 'Structural Analysis of a Low Wind Speed Wind Turbine Blade', in John S; Das R (ed.), Proceedings of the 8th Australasian Congress on Applied Mechanics, Engineers Australia, Melbourne, pp. 966 - 973, presented at 8th Australasian Congress on Applied Mechanics, Melbourne, 23 November 2014 - 26 November 2014
2014
Ashraf MA; Morozov EV; Falzon P; Shankar K, 2014, 'Liner Stability Analysis for HDPE lined Pipe under Bending', in Das R; John S (ed.), 8th Australasian Congress on Applied Mechanics, Engineers Australia, Melbourne, pp. 811 - 817, presented at 8th Australasian Congress on Applied Mechanics, Melbourne, 23 November 2014 - 26 November 2014
2014
Yu K; Morozov EV; Ashraf MA; Shankar K, 2014, 'Buckling Behaviour of Reinforced Thermoplastic Pipes under Combined External Pressure and Bending', in Das R; John S (ed.), 8th Australasian Congress on Applied Mechanics, Melbourne, pp. 87 - 94, presented at 8th Australasian Congress on Applied Mechanics, Melbourne, 23 November 2014 - 26 November 2014, http://trove.nla.gov.au/version/206075394
2014
Ramakrishnan KR; Wang H; Shankar K; Fien A, 2014, 'Measurement of biomechanical energy delivered through kicking', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 614 - 621
2014
Ramakrishnan KR; Shankar K, 2014, 'Low velocity impact of sandwich plates with different cores - Experiment and Simulation', in Proceedings of the 1st International Conference on Mechanics of Composites, Stony Brook University, Long Island, New York, USA, Stony Brook University, NY, presented at Mechanics of Composites (MECHCOMP 2014), Stony Brook University, NY, 08 June 2014 - 12 June 2014, http://imechanica.org/node/15199
2014
Wang H; Hazell PJ; Shankar K, 2014, 'Numerical simulation of ballistic impact on woven CFRP laminate', in 8th Australasian Congress on Applied Mechanics, ACAM 2014, as Part of Engineers Australia Convention 2014, pp. 1021 - 1029
2014
Chowdhury MS; morozov ; ali ; shankar K, 2014, 'DAMAGE DETECTION IN COMPOSITE PLATES USING TRANSIENT VIBRATION ANALYSIS', in COMPOSITE AUSTRALIA and CRC-ACS CONFERENCE, COMPOSITE AUSTRALIA and CRC-ACS CONFERENCE, Newcastle, Australia, presented at COMPOSITE AUSTRALIA and CRC-ACS CONFERENCE, Newcastle, Australia, 07 April 2014 - 09 April 2014, http://www.compositesaustralia.com.au/wp-content/uploads/2014/04/Md.-Shakar-Ullah-Chowdhury.pdf
2014
Ramakrishnan KR; Thompson WRH; Shankar K; Ashraf MA, 2014, 'Impact behaviour of natural fibre reinforced composites based on bagasse fibres', in Impact behaviour of natural fibre reinforced composites based on bagasse fibres, Mechanics of Composites (MECHCOMP 2014), Stony Brook University, NY, presented at Mechanics of Composites (MECHCOMP 2014), Stony Brook University, NY, 08 June 2014 - 12 June 2014, https://sites.google.com/site/mechcomp2014/
2014
Wang H; Hazell P; Shankar K, 2014, 'A numerical study on through-thickness shock response of CFRP composite', Newcastle, Australia, presented at Composites Australia and CRC-ACS Conference 2014: Materials for a Lighter and Smarter World, Newcastle, Australia, 07 April 2014 - 09 April 2014
2014
Thabet AM; Shankar K, 2013, 'Finite Element Study on the Influence of Shear Key Diameter on the Shear Performance of Composite Sandwich Panel with PU Foam Core', in Yahaya M (ed.), Finite Element Study on the Influence of Shear Key Diameter on the Shear Performance of Composite Sandwich Panel with PU Foam Core, 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, presented at 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, 26 July 2013 - 27 July 2013, http://www.cmame.net/
2013
Thabet AM; Shankar K; Morozov EV, 2013, 'The Impact of the Shear Key Pitch on the Shear Performance of the Composite Sandwich Panels with PVC foam core: FE Analysis', in Bualar T (ed.), Proceedings of Annual Conference on Engineering and Information Technology (ACEAIT), Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, presented at Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, 28 June 2013 - 30 June 2013
2013
Thabet AM; Shankar K, 2013, 'In-Plane Shear Damage Prediction of Composite Sandwich Panel with Foam Core', in Yahaya M (ed.), In-Plane Shear Damage Prediction of Composite Sandwich Panel with Foam Core, 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, presented at 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, 26 July 2013 - 27 July 2013, http://www.cmame.net/
2013
Thabet AM; Shankar K, 2013, 'Investigation on Effect of the Pitch of Shear Keys on the In-Plane Shear Performance of Sandwich Panels with PU Foam Core: FE Study', in Yahaya M (ed.), Investigation on Effect of the Pitch of Shear Keys on the In-Plane Shear Performance of Sandwich Panels with PU Foam Core: FE Study, 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, presented at 2013 INTERNATIONAL CONFERENCE ON MECHANICAL, AUTOMOTIVE AND MATERIALS ENGINEERING (CMAME 2013), Hong Kong, 26 July 2013 - 27 July 2013, http://www.cmame.net/
2013
Zhang Z; Shankar K; Ray T; Tahtali M, 2013, 'Delamination Monitoring of Composite Plates using Vibration-based Surrogate Assisted Optimisation', in Proceedings 8th DSTO International Conference on Health & Usage Monitoring Systems (HUMS2013), 8th DSTO International Conference on Health & Usage Monitoring Systems (HUMS2013), Melbourne, presented at 8th DSTO International Conference on Health & Usage Monitoring Systems (HUMS2013), Melbourne, 26 February 2013 - 28 February 2013
2013
Thabet AM; Shankar K; Morozov EV, 2013, 'Numerical Investigation on the Influence of the Shear Key Diameter on the Shear Response of the Composite Sandwich Panels with PVC foam core', in Bualar T (ed.), Proceedings of Annual Conference on Engineering and Information Technology (ACEAIT), Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, presented at Annual Conference on Engineering & Information Technology (ACEAIT 2013), Seoul, Korea, 28 June 2013 - 30 June 2013, http://www.aceait.org/index.asp?id=1
2013
Ali MY; Shankar K, 2013, 'Agent based damaged detection in composite laminates', in Proceedings of SPIE - The International Society for Optical Engineering, The Society, Bellingham, WA, presented at Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security 2013, San Diego, CA, 11 March 2013 - 14 March 2013, http://dx.doi.org/10.1117/12.2009557
2013
Uddin MS; Morozov EV; Shankar K, 2013, 'Stress Analysis of a Filament Wound Composite Flywheel Disk', in Hoa SV; Hubert P (ed.), ICCM International Conferences on Composite Materials, Canadian Association for Composite Structures and Materials, Montreal, Canada, pp. 3053 - 3063, presented at The 19th Int. Conf. on Composite Materials (ICCM-19), Montreal, Canada, 28 July 2013 - 02 August 2013, http://bytepress.com/
2013
Chen JF; Morozov EV; Shankar K, 2013, 'Progressive Failure Analysis of Composite Laminates Including Strain Rate Effect', in Proceedings of the 19th Int. Conf. on Composite Materials (ICCM-19), Canadian Association for Composite Structures and Materials, Montreal, Canada, pp. 4122 - 4132, presented at 19th Int. Conf. on Composite Materials (ICCM-19), Montreal, Canada, 28 July 2013 - 02 August 2013, http://bytepress.com/
2013
Ali MY; Shankar K, 2013, 'Structural Health Monitoring of Composites using System Identification', in Proceedings 15th Australian International Aerospace Congress (AIAC15), 15th Australian International Aerospace Congress, Melbourne, Australia, pp. 1 - 17, presented at 15th Australian International Aerospace Congress, Melbourne, Australia, 25 February 2013 - 28 February 2013
2013
Wang C; Shankar K; Morozov EV, 2012, 'Design of Deep Sea Composite Risers under Combined Environmental Loads', in Composites CRC and Composites Australia Conference and Exhibition, Composites Australia, Melbourne, pp. 97 - 110, presented at 2012 Composites Australia & CRC-ACS Conference, Leura, Blue Mountains, NSW, 15 March 2012 - 16 March 2012, http://www.compositesaustralia.com.au/wp-content/uploads/2012/09/Composites-Australia-and-CRC-2012-Proceedings-Final.pdf
2012
Zhang Z; Morozov EV; Shankar K; Tahtali M, 2012, 'DELAMINATION DETECTION IN COMPOSITE STRUCTURES USING FREQUENCY MEASUREMENTS', in Composites CRC and Composites Australia Conference and Exhibition, Composites Australia, Melbourne, pp. 1 - 16, presented at Diversity in Composites, Fairmont Resort Blue Mountains, Leura, New South Wales, Australia, 15 March 2012 - 16 March 2012
2012
Ihesiulor O; Shankar K; Zhang Z; Ray T, 2012, 'EFFECTIVENESS OF ARTIFICIAL NEURAL NETWORKS AND SURROGATE-ASSISTED OPTIMIZATION TECHNIQUES IN DELAMINATION DETECTION FOR STRUCTURAL HEALTH MONITORING', in ACTA Press, ACTA Press, Banff, Canada, pp. 198 - 203, presented at The 23rd IASTED International Conference on Modelling and Simulation, Banff, Canada, 03 July 2012 - 05 July 2012, http://dx.doi.org/10.2316/P.2012.783-042
2012
Ihesiulor O; Shankar K; Zhang Z; Ray T, 2012, 'DELAMINATION DETECTION USING METHODS OF COMPUTATIONAL INTELLIGENCE', in AIP proceeding, AIP, Las Vegas, USA, pp. 303 - 310, presented at The sixth Global Conference on Power Control and Optimization, Las Vegas, USA, 06 August 2012 - 08 August 2012, http://dx.doi.org/10.1063/1.4769006
2012
Ramakrishnan KR; Shankar K; Viot P; Guerard S, 2012, 'A Numerical Study of the Impact Properties of Sandwich Panels with Different Cores', in Proceedings of 7th Australasian Congress of Applied Mechanics, Engineers Australia, Canberra ACT, pp. 915 - 924, presented at Australasian Congress on Applied Mechanics, Adelaide, SA, 09 December 2012 - 12 December 2012
2012
Dhopade P; Neely AJ; Young J; Shankar K, 2012, 'High-cycle fatigue of fan blades accounting for fluid-structure interaction', in Proceedings of the ASME Turbo Expo, pp. 1365 - 1372, http://dx.doi.org/10.1115/GT2012-68102
2012
Dhopade P; Neely AJ; Young J; Shankar K, 2011, 'Use of Fluid-Structure Interaction to Estimate Fatigue Life of Gas Turbine Compressor Blades', in 20th International Society for Airbreathing Engines Conference, ISABE 2011, Gothenburg, presented at ISABE 2011, Gothenburg, 12 September 2011 - 16 September 2011
2011
Rahman M; Morozov EV; Shankar K, 2011, 'Dynamic response of bonded and unbonded laminated composite panels', in SAMPE Tech 2011 Conference and Exhibition: Developing Scalable Materials and Processes for Our Future, Soc. for the Advancement of Material and Process Engineering, Covina, CA, United States, pp. 11 p., presented at SAMPE Tech 2011 Conference and Exhibition: Developing Scalable Materials and Processes for Our Future, Fort Worth, TX, United States, 17 October 2011 - 20 October 2011
2011
Zhang Z; Shankar K; Tahtali M; Morozov EV, 2011, 'Graphical detection method for delaminations', in Mechanical, Materials and Manufacturing Engineering, Trans Tech Publications, Germany, pp. 1410 - 1415, presented at ICMMME 2011, Homg Kong, http://dx.doi.org/10.4028/www.scientific.net/AMM.66-68.1410
2011
Chen J; Morozov EV; Shankar K, 2011, 'Plastic damage model for progressive failure Analysis of composite structures', in Lee WI (ed.), Proceedings of the 18th Int. Conf. on Composite Materials (ICCM-18), Jeju Island, Korea, August 21-26, 2011, (CD-ROM)., The Korean Society for Composite Materials, Seoul, Korea, pp. pp.6, CD-ROM, presented at 18th International Conference on Composite Materials, Jeju, Korea, 21 August 2011 - 26 August 2011, http://www.iccm18.org/
2011
Wang C; Shankar K; Morozov EV, 2011, 'Tailoring of composite reinforcements for weight reduction of offshore production risers', in Mechanical, Materials and Manufacturing Engineering, Trans Tech Publications, Germany, pp. 1416 - 1421, presented at 2011 International Conference on Mechanical Materials and Manufacturing Engineering, ICMMME 2011, Nanchang, China, 20 June 2011 - 22 June 2011, http://dx.doi.org/10.4028/www.scientific.net/AMM.66-68.1416
2011
Rahman M; Morozov EV; Shankar K; Fien AR, 2011, 'Computational Analysis of Low Velocity Impact Response of Composite Panels', in Applied Mechanics and Materials, Trans Tech Publications, Switzerland, pp. 1135 - 1138, presented at 2011 International Conference on Mechatronics and Applied MechanicsiICMAM2011j, Hong Kong, 27 December 2011 - 28 December 2011, http://dx.doi.org/10.4028/www.scientific.net/AMM.157-158.1135
2011
Chen J; Morozov EV; Shankar K, 2011, 'Numerical analysis of the progressive failure of composite materials and structures using plastic-damage model', in Proceedings of the International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, CIMNE, Barcelona, Spain, Barcelona, presented at International Conference on Computational Modeling of Fracture and Failure of Materials and Structures, Barcelona, Spain, 06 June 2011 - 08 June 2011, http://congress.cimne.com/cfrac2011/frontal/ProgIntro.asp
2011
Ramakrishnan KR; Shankar K; Neely AJ; Horoschun G, 2010, 'Evaluation of low velocity impact using a multi-parameter approach', in Evaluation of low velocity impact using a multi-parameter approach, International Conference on Experimental Mechanics, Kuala Lumpur, presented at International Conference on Experimental Mechanics, Kuala Lumpur, 30 November 2010, http://online.nuclearmalaysia.gov.my/sems/icem2010/
2010
Rahman M; Morozov EV; Shankar K; Tahtali M, 2010, 'Simulation of impact response of multilayered panels composed of bonded and unbonded plies', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, pp. 631 - 639, presented at The 6th Australasian Congress on Applied Mechanics, ACAM 6, Perth, Australia, 12 December 2010 - 15 December 2010, http://search.informit.com.au/documentSummary;dn=016876767383815;res=IELENG
2010
Zhang Z; Shankar K; Tahtali M; Morozov EV, 2010, 'Vibration modelling of composite laminates with delamination damage', in Proceedings of 20th International Congress on Acoustics ICA 2010, Australian Acoustical Society, Sydney, pp. 1 - 8, presented at International Congress on Acoustics, Sydney, 23 August 2010 - 27 August 2010, http://www.acoustics.asn.au/conference_proceedings/ICA2010/cdrom-ICA2010/papers/p909.pdf
2010
Wang C; Shankar K; Morozov EV, 2010, 'Numerical Analysis of Deep Sea Steel Risers under Combined Loads', in Proceedings of the 6th Australiasian Congress on Applied Mechanics, Engineers Australia, ACT Australia, presented at 6th Australasian Congress on Applied Mechanics, Perth, Australia, 12 December 2010 - 15 December 2010
2010
Shankar K; Kannappan L, 2009, 'Structural Integrity Assessment of Plates using Vibration Monitoring: Theory and Simulation', in Thirteenth Australian International Aerospace Congress, DSTO, Melbourne, presented at 6th DSTO International Conference on Health & Usage Monitoring (HUMS 09), Melbourne, Victoria, 09 March 2009 - 12 March 2009
2009
Choi JH; Shankar K; Fien AR; Neely AJ, 2009, 'Methods of manufacture of corrugated wire mesh laminates', in Proceedings of World Academy of Sciency, Engineering and Technology, World Academy of Sciency, Engineering and Technology, Tokyo, Japan, presented at ICME 2009: International Conference on Mechanical Engineering, Tokyo, Japan, 27 May 2009 - 29 May 2009
2009
Kannappan L; Shankar K; Sreenatha AG, 2007, 'Damage detection using frequency measurements', in Wicks AL (ed.), International Modal Analysis Conference (IMAC 25), Florida, USA, pp. 1 - 8, presented at International Modal Analysis Conference (IMAC 25), Florida, USA, 19 February 2007 - 22 February 2007
2007
Kannappan L; Shankar K; Sreenatha AG, 2007, 'Detection of multiple cracks in cantilever beams using frequency measurements', in Gdoutos EE (ed.), International conference on experimental mechanics (ICEM 13), International conference on experimental mechanics (ICEM 13), Alexandroupolis, pp. 415 - 416, presented at International conference on experimental mechanics (ICEM 13), Alexandroupolis, 01 July 2007 - 06 July 2007
2007
Kannappan L; Shankar K, 2007, 'Non destructive inspection of plates using frequency measurements', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
2007
Kannappan L; Shankar K; Sreenatha AG, 2007, 'Experimental verification of detection of centre cracks in cantilever beams using energy methods', in International conference on advanced technology in experimental mechanics (ATEM 2007), International conference on advanced technology in experimental mechanics (ATEM `07), Fukuoka, Japan, presented at International conference on advanced technology in experimental mechanics (ATEM `07), Fukuoka, Japan, 12 September 2007 - 14 September 2007
2007
Kannappan L; Shankar K; Sreenatha AG, 2007, 'Detection of centre cracks in cantilever beams using frequency measurements', in Damage assessment of structures 2007, Damage assessment of structures 2007, Torino, Italy, presented at Damage assessment of structures 2007, Torino, Italy, 25 June 2007 - 27 June 2007
2007
Ahmed A; Neely AJ; Shankar K, 2007, 'Effect of ceramic reinforcements on the mechanical behaviour of 7xxx series aluminium matrix composites', in Proceedings of the 5th Australasian Congress on Applied Mechanics : 10-12 December 2007, Brisbane, Australia, Engineers Australia, Brisbane, Queensland, Australia, presented at 5th Australian Congress on Applied Mechanics, ACAM 2007, Brisbane, Qld, 10 December 2007 - 12 December 2007
2007
Kannappan L; Shankar K, 2007, 'Frequency measurement based damage detection methods applied to different cracks configurations', in 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, Hawaii, pp. 4327 - 4338, presented at 48th AIAA/ASME/ASCE/AHS/ASC structures, structural dynamics and materials conference, Hawaii, 23 April 2007 - 26 April 2007
2007
Ahmed A; Neely AJ; Shankar K, 2007, 'Review of the mechanical behaviour of micrometric and nanometric particulate reinforced metal matrix composites', in Material Science and Technology 2007, Detroit, Michigan, pp. 1993 - 2004, presented at Material Science and Technology `07, Detroit, Michigan, 16 September 2007 - 20 September 2007
2007
Shankar K; Lai JC; Hang H, 2006, 'Prediction of dynamic response due to distributed structural modifications', in 19th Australasian Conference on the Mechanics of Structures and Materials, Christchruch, New Zealand, pp. 295 - 301, presented at 19th Australasian Conference on the Mechanics of Structures and Materials, Christchruch, New Zealand, 29 November 2006 - 01 December 2006
2006
Shankar K; Cave D, 2006, 'Mechanical properties of ultra low density glass micro-sphere filled syntactic foam composites', in 19th Australasian Conference on the Mechanics of Structures and Materials, Christchruch, New Zealand, pp. 595 - 600, presented at 19th Australasian Conference on the Mechanics of Structures and Materials, Christchruch, New Zealand, 29 November 2006 - 01 December 2006
2006
Couldrick J; Gai SL; Milthorpe JF; Shankar K, 2006, 'Theoretical Analysis of Unswept Normal Shock Wave/Boundary Layer Interaction Control Using Streamwise Flaps', in 3rd AIAA Flow Control Conference, pp. 894 - 903, presented at 3rd AIAA Flow Control Conference
2006
Moore SM; Lai JC; Shankar K, 2005, 'ARMAX Modal Parameter estimation using Random and Periodic Excitation', in Brincker R; Moller N (ed.), 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, pp. 463 - 470, presented at 1st International Conference on Operational Modal Ananlysis, Copenhagen, Denmark, 26 April 2005 - 27 April 2005
2005
Couldrick JS; Gai SL; Holden HA; Babinsky H; Milthorpe JF; Shankar K, 2004, 'Active control of normal shock wave/turbulent boundary layer interaction using "Smart" piezoelectric flap actuators', in 2nd AIAA Flow Control Conference
2004
Moore SM; Zhang B; Lai JC; Shankar K, 2003, 'Model updating and determination of structural dynamic properties in the presence of a second source of excitation', in Forsyth G (ed.), Proeedings of the 3rd International Conference on Health and Usage Monitoring - HUMS 2003, Proeedings of the 3rd International Conference on Health and Usage Monitoring - HUMS 2003, Melbourne, pp. 27 - 34, presented at Proeedings of the 3rd International Conference on Health and Usage Monitoring - HUMS 2003, Melbourne, 17 February 2003 - 18 February 2003
2003
Couldrick J; Shankar K; Gai SL; Milthorpe JF, 2002, 'Design Optimisation of `Smart` Flap Actuators for Swept Shock Wave/Turbulent Boundary Layer Interaction Control', in Cho C-K; Schnobrich WC (ed.), ASEM 2002, Busan, South Korea, pp. 519 - 531, presented at ASEM `02, Busan, South Korea, 21 August 2002 - 23 August 2002, http://dx.doi.org/10.1296/SEM2003.16.05.01
2002
Couldrick J; Gai S; Milthorpe J; Shankar K, 2002, 'Swept shock wave / turbulent boundary layer interaction control with "smart" flap actuators', in 40th AIAA Aerospace Sciences Meeting and Exhibit, http://dx.doi.org/10.2514/6.2002-973
2002
Couldrick J; Gai SL; Milthorpe JF; Shankar K, 2002, 'Swept Shock Wave/Turbulent Boundary Layer Interaction Control with `Smart` Flap Actuators. Paper 0973', in 40th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, presented at 40th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, USA, 14 January 2002 - 17 January 2002
2002
Todo M; Shinohara N; Arakawa K; Shankar K, 2002, 'Effect of Crystallization on the Mode I Fracture Behaviour of Biodegradable Poly(lactic acid)', in 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems, 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems, Taiwan, presented at 3rd Asian International Symposium on Biomaterials and Drug Delivery Systems, Taiwan, 14 April 2002 - 15 April 2002
2002
Shankar K; Wu W, 2001, 'Effect of welding and weld repair on crack propagation behavior in aluminium alloy 5083 plates', in International Conference on Advances in Production and Processing of Aluminium, APPA2001, International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, presented at International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, 12 February 2001 - 15 February 2001
2001
Shankar K; Dhamari RD, 2001, 'Fatigue Behaviour of Aluminium Alloy 7075 Bolted Joints treated with Oily Film Corrosion Compounds', in International Conference on Advances in Production and Processing of Aluminium, APPA2001, International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, presented at International Conference on Advances in Production and Processing of Aluminium, APPA2001, Bahrain, 12 February 2001 - 15 February 2001
2001
Couldrick J; Gai SL; Shankar K; Milthorpe JF, 2001, 'Development of `Smart` Flap Actuators for Swept Shock Wave Boundary Layer Interation Control', in Heslehurst RB (ed.), AIAC 2003: 10th Australian International Aerospace Congress, AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, pp. 9, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 March 2001 - 08 March 2001
2001
Shankar K; Huimin X; Asundi A; Eng OK, 2001, 'Residual stress measurement in laminated fibre composites with moire interferometry', in Heslehurst RB (ed.), AIAC 2003: 10th Australian International Aerospace Congress, AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 March 2001 - 08 March 2001
2001
Shankar K; Dhamari RD; Wei R; Hinton B; Clark G; Sharp K; Mills T, 2001, 'Effect of Corrosion Prevention Compounds on Fatigue of One-And-Half DogBone Joints', in Heslehurst RB (ed.), AIAC 2003: 10th Australian International Aerospace Congress, AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 March 2001 - 08 March 2001
2001
Shankar K; Tahtali M; Torr G; Chester R, 2001, 'Piezoelectric film sensors for measurement of peel stresses in bonded joints', in Heslehurst RB (ed.), AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, pp. 363 - 368, presented at AIAC 2003: 10th Australian International Aerospace Congress, Brisbane, Australia, 06 March 2001 - 08 March 2001, http://dx.doi.org/10.1117/12.429603
2001
Russo SG; Sharp PK; Dhamari RD; Mills TB; Hinton B; Shankar K; Clark G, 2000, 'Effect of the environment and corrosion on the fatigue life of a simulated aircraft structural joint', in IMPLAST 2000, 7th international symposium on structural failure and plasticity (IMPLAST 2000), Melbourne, pp. 765 - 771, presented at 7th international symposium on structural failure and plasticity (IMPLAST 2000), Melbourne, 04 October 2000 - 06 October 2000
2000
Tahtali M; Shankar K; Torr G; Chesr , 2000, 'Measurement of peel stresses in adhesively bonded joints using piezoelectric film sensors', in ICCE/7, 7th International Conference Composites Engineering, Denver, Colorado, pp. 847 - 848, presented at 7th International Conference Composites Engineering, Denver, Colorado, 02 July 2000 - 08 July 2000
2000
Dhamari RD; Shankar K, 2000, 'The effects of corrosion prevention compounds and clamping force on fatigue behaviour of mechanically fastened joints', in 41st AIAA/ASME/ASCE/AHS/ASC conf, 41st AIAA/ASME/ASCE/AHS/ASC conf, Atlanta, Georgia USA, presented at 41st AIAA/ASME/ASCE/AHS/ASC conf, Atlanta, Georgia USA, 03 April 2000 - 06 April 2000
2000
Fei D; Shankar K, 1999, 'Finite element modelling of deformation patterns in strong and weak adhesively bonded joints', in ACAM 99 2nd Australasian congress on applied mechanics, ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, presented at ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, 10 February 1999 - 12 February 1999
1999
Dhamari RD; Shankar K; Wei R, 1999, 'Effect of corrosion prevention compounds on fatigue life of double lap joints', in ACAM 99 2nd Australasian congress on applied mechanics, ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, presented at ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, 10 February 1999 - 12 February 1999
1999
Wei R; Shankar K, 1999, 'Influence of friction and fastener fit onload carrying behaviour of one-and-half dogbone joints', in ACAM 99 2nd Australasian congress on applied mechanics, ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, presented at ACAM 99 2nd Australasian congress on applied mechanics, ADFA, Canberra, 10 February 1999 - 12 February 1999
1999
Wu W; Shankar K, 1999, 'Fatigue crack propagation behaviour of welded and weld-repaired 5083 aluminium alloy joints', in Penny RK (ed.), FAILURES 2000, ENGINEERING MATERIALS ADVISORY SERVICES LTD, South Africa, pp. 453 - 462, presented at FAILURES 2000, South Africa, 24 July 1999 - 28 July 1999, http://gateway.webofknowledge.com/gateway/Gateway.cgi?GWVersion=2&SrcApp=PARTNER_APP&SrcAuth=LinksAMR&KeyUT=WOS:000166689500030&DestLinkType=FullRecord&DestApp=ALL_WOS&UsrCustomerID=891bb5ab6ba270e68a
1999
Fei D; Shankar K, 1999, 'Non destructive inspection of weak bonds in adhesively bonded joints', in ICCM 12, ICCM 12, Paris, Francs, pp. CD-R, presented at ICCM 12, Paris, Francs, 05 July 1999 - 09 July 1999
1999
Russo SG; Sharp PK; Dhamari RD; Hinton B; Shankar K; Clark G, 1999, 'Effect of the environment and corrosion on the fatigue life of a simulated aircraft structural joint', in Cyril Wetherall (ed.), IAC 99, IAC 99, Adelaide, Sth Aust, pp. . - ., presented at IAC 99, Adelaide, Sth Aust, 13 September 1999 - 15 September 1999
1999
Shankar K; Dhamari RD, 1999, 'Influence of lubricating corrosion prevention compounds on fatigue behaviour of double lap joints', in ATEM 1999, ATEM`99, Ube City, Japan, pp. 705 - 709, presented at ATEM`99, Ube City, Japan, 21 July 1999 - 24 July 1999
1999
Shankar K; Li J, 1998, 'Load Transfer Mechanism in Bolted Double Lap Joints', in Clement Dousset (ed.), ICAS 98, Congress of the International Council of the Aeronautical Sciences, ICAS`98, Melbourne, pp. CDRom, presented at ICAS`98, Melbourne, 01 September 1998
1998
Shankar K; Tindall N; Hinton B; Salagaras M, 1998, 'Effect of Aircraft Washing on the Life of Corrosion Prevention Compounds', in Harris CE (ed.), 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA, pp. 378 - 386, presented at 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA
1998
Shankar K; Fei D, 1998, 'Modelling of Weak Bonds in Adhesively Fastened Joints', in Harris CE (ed.), 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA, pp. 875 - 884, presented at 2nd Joint NASA/FAA/DoD Conference on Aging Aircraft, Williamsburg, USA
1998
Shankar K; Baird JP; Clark R; Williamson HM, 1997, 'Optical examination of load transfer in riveted lap joints using portable holographic interferometry', in Proceedings of SPIE - The International Society for Optical Engineering, pp. 158 - 163
1997
Tahtali M; Shankar K, 1995, 'Effect of residual stresses on delaminations in polymer composites', in 14th ACMSM: Australasian Conference on the Mechanics of Structures and Materials, 14th ACMSM: Australasian Conference on the Mechanics of Structures and Materials, Hobart, presented at 14th ACMSM: Australasian Conference on the Mechanics of Structures and Materials, Hobart, 11 December 1995 - 13 December 1995
1995
Conference Posters
add
Ramakrishnan KR; Guérard S; Shankar K; Viot P, (ed.), 2013, 'Development of a Finite Element Model for the study of the impact behaviour of sandwich panels', Bordeaux, presented at 21 eme Congr es Fran cais de M ecanique, Bordeaux, 26 August 2013 - 30 August 2013
2013
Conference Proceedings (Editor of)
add
Chowdhury ; shankar ; ali ; morozov , (eds.), 2014, 'DAMAGE DETECTION IN COMPOSITE PLATES USING TRANSIENT VIBRATION ANALYSIS', Composites Australia and CRC-ACS, Bangladesh, presented at Composites Australia and CRC-ACS 2014 Conference, Bangladesh, 07 April 2014 - 09 April 2014
2014
Journal articles
add
Aryal B; Morozov EV; Shankar K, 2021, 'Effects of ballistic impact damage on mechanical behaviour of composite honeycomb sandwich panels', Journal of Sandwich Structures and Materials, vol. 23, pp. 2064 - 2085, http://dx.doi.org/10.1177/1099636220909743
2021
Wang C; Wang H; Shankar K; Morozov EV; Hazell PJ, 2021, 'On the mechanical behaviour of steel wire mesh subjected to low-velocity impact', Thin-Walled Structures, vol. 159, pp. 107281 - 107281, http://dx.doi.org/10.1016/j.tws.2020.107281
2021
Vijayan K; Ramalingam S; Raeez Akthar Sadik M; Prasanth AS; Nampoothiri J; Pablo Escobedo-Diaz J; Shankar K, 2021, 'Fabrication of Co-Continuous ceramic composite (C4) through gas pressure infiltration technique', Materials Today: Proceedings, vol. 46, pp. 1013 - 1016, http://dx.doi.org/10.1016/j.matpr.2021.01.212
2021
Ramakrishnan KR; Guérard S; Zhang Z; Shankar K; Viot P, 2021, 'Numerical modelling of foam-core sandwich panels with nano-reinforced composite facesheets', Journal of Sandwich Structures and Materials, vol. 23, pp. 1166 - 1191, http://dx.doi.org/10.1177/1099636219856537
2021
Wang C; Ramakrishnan KR; Shankar K; Morozov E; Wang H; Fien A, 2021, 'Homogenized shell element-based modeling of low-velocity impact response of stainless-steel wire mesh', Mechanics of Advanced Materials and Structures, vol. 28, pp. 1932 - 1947, http://dx.doi.org/10.1080/15376494.2020.1716415
2021
Pan J; Shankar K; Singh HK; Wang H; Zhang Z; Tong H, 2021, 'Vibration-based detection of skin-stiffener debonding on composite stiffened panels using surrogate-assisted algorithms', Composite Structures, vol. 270, pp. 114090 - 114090, http://dx.doi.org/10.1016/j.compstruct.2021.114090
2021
Wang H; Weerasinghe D; Mohotti D; Hazell PJ; Shim VPW; Shankar K; Morozov EV, 2021, 'On the impact response of UHMWPE woven fabrics: Experiments and simulations', International Journal of Mechanical Sciences, vol. 204, pp. 106574 - 106574, http://dx.doi.org/10.1016/j.ijmecsci.2021.106574
2021
Wang C; Shankar K; Morozov E; Ram Ramakrishnan K; Fien A, 2020, 'Characterization of Shear Behavior in Stainless Steel Wire Mesh Using Bias-Extension and Picture Frame Tests', Journal of Engineering Mechanics, vol. 146, http://dx.doi.org/10.1061/(ASCE)EM.1943-7889.0001710
2020
Wang H; Hazell PJ; Shankar K; Morozov EV; Jovanoski Z; Brown AD; Li Z; Escobedo-Diaz JP, 2020, 'Tensile properties of ultra-high-molecular-weight polyethylene single yarns at different strain rates', Journal of Composite Materials, vol. 54, pp. 1453 - 1466, http://dx.doi.org/10.1177/0021998319883416
2020
Prabhakaran S; Krishnaraj V; Shankar K; Senthilkumar M; Zitoune R, 2020, 'Experimental investigation on impact, sound, and vibration response of natural-based composite sandwich made of flax and agglomerated cork', Journal of Composite Materials, vol. 54, pp. 669 - 680, http://dx.doi.org/10.1177/0021998319871354
2020
Prabhakaran S; Krishnaraj V; Senthilkumar M; Zitoune R; Shankar K, 2019, 'Effect of water absorption on the flexural strength of a green sandwich composite', MATERIALS TESTING, vol. 61, pp. 369 - 375, http://dx.doi.org/10.3139/120.111330
2019
Ramakrishnan KR; Guérard S; Maheo L; Shankar K; Viot P, 2019, 'A new method for the study of parabolic impact of foam-core sandwich panels', Composites Part B: Engineering, vol. 167, pp. 717 - 727, http://dx.doi.org/10.1016/j.compositesb.2019.02.062
2019
Aryal B; Morozov EV; Wang H; Shankar K; Hazell PJ; Escobedo-Diaz JP, 2019, 'Effects of impact energy, velocity, and impactor mass on the damage induced in composite laminates and sandwich panels', Composite Structures, vol. 226, http://dx.doi.org/10.1016/j.compstruct.2019.111284
2019
Zhang Z; He M; Liu A; Singh HK; Ramakrishnan KR; Hui D; Shankar K; Morozov EV, 2018, 'Vibration-based assessment of delaminations in FRP composite plates', Composites Part B: Engineering, vol. 144, pp. 254 - 266, http://dx.doi.org/10.1016/j.compositesb.2018.03.003
2018
Ramakrishnan KR; Wang H; Shankar K; Fien A, 2018, 'A new method for the measurement and analysis of biomechanical energy delivered by kicking', Sports Engineering, vol. 21, pp. 53 - 62, http://dx.doi.org/10.1007/s12283-017-0244-z
2018
Wang C; Sun M; Shankar K; Xing S; Zhang L, 2018, 'CFD simulation of vortex induced vibration for frp composite riser with different modeling methods', Applied Sciences (Switzerland), vol. 8, http://dx.doi.org/10.3390/app8050684
2018
Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP, 2017, 'Impact behaviour of Dyneema® fabric-reinforced composites with different resin matrices', Polymer Testing, vol. 61, pp. 17 - 26, http://dx.doi.org/10.1016/j.polymertesting.2017.04.026
2017
Wang H; Hazell PJ; Shankar K; Morozov EV; Escobedo JP; Wang C, 2017, 'Effects of fabric folding and thickness on the impact behaviour of multi-ply UHMWPE woven fabrics', Journal of Materials Science, vol. 52, pp. 13977 - 13991, http://dx.doi.org/10.1007/s10853-017-1482-y
2017
Wang C; Shankar K; Morozov EV, 2017, 'Global design and analysis of deep sea FRP composite risers under combined environmental loads', Advanced Composite Materials, vol. 26, pp. 79 - 98, http://dx.doi.org/10.1080/09243046.2015.1052187
2017
Yu K; Morozov EV; Ashraf MA; Shankar K, 2017, 'A review of the design and analysis of reinforced thermoplastic pipes for offshore applications', Journal of Reinforced Plastics and Composites, vol. 36, pp. 1514 - 1530, http://dx.doi.org/10.1177/0731684417713666
2017
Zhang Z; Zhan C; Shankar K; Morozov EV; Singh HK; Ray T, 2017, 'Sensitivity analysis of inverse algorithms for damage detection in composites', Composite Structures, vol. 176, pp. 844 - 859, http://dx.doi.org/10.1016/j.compstruct.2017.06.019
2017
Wang C; Shankar K; Ashraf MA; Morozov EV; Ray T, 2016, 'Surrogate-assisted optimisation design of composite riser', Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 230, pp. 18 - 34, http://dx.doi.org/10.1177/1464420714539304
2016
Zhang Z; Shankar K; Morozov EV; Tahtali M, 2016, 'Vibration-based delamination detection in composite beams through frequency changes', JVC/Journal of Vibration and Control, vol. 22, pp. 496 - 512, http://dx.doi.org/10.1177/1077546314533584
2016
Ramakrishnan KR; Denneulin S; Guérard S; Shankar K; Viot P, 2016, 'Finite element modelling of the low velocity impact response of composite plates with block copolymer nano-reinforcements', International Journal of Automotive Composites, vol. 2, pp. 3 - 3, http://dx.doi.org/10.1504/ijautoc.2016.078098
2016
Wang C; Shankar K; Morozov EV, 2016, 'Tailored design of top-tensioned composite risers for deep-water applications using three different approaches', Advances in Mechanical Engineering, vol. 9, http://dx.doi.org/10.1177/1687814016684271
2016
Wang H; Ramakrishnan KR; Shankar K, 2016, 'Experimental study of the medium velocity impact response of sandwich panels with different cores', Materials and Design, vol. 99, pp. 68 - 82, http://dx.doi.org/10.1016/j.matdes.2016.03.048
2016
Mostafa A; Shankar K; Morozov EV, 2015, 'Independent analytical technique for analysis of the flexural behaviour of the composite sandwich panels incorporated with shear keys concept', Materials and Structures/Materiaux et Constructions, vol. 48, pp. 2455 - 2474, http://dx.doi.org/10.1617/s11527-014-0331-6
2015
Yu K; Morozov EV; Ashraf MA; Shankar K, 2015, 'Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending', Composite Structures, vol. 131, pp. 453 - 461, http://dx.doi.org/10.1016/j.compstruct.2015.05.033
2015
Wang C; Shankar K; Morozov EV, 2015, 'Tailored local design of deep sea FRP composite risers', Advanced Composite Materials, vol. 24, pp. 375 - 397, http://dx.doi.org/10.1080/09243046.2014.898438
2015
Ihesiulor OK; Shankar K; Zhang Z; Ray T, 2014, 'Delamination detection with error and noise polluted natural frequencies using computational intelligence concepts', Composites Part B: Engineering, vol. 56, pp. 906 - 925, http://dx.doi.org/10.1016/j.compositesb.2013.09.032
2014
Ramakrishnan KR; Guérard S; Viot P; Shankar K, 2014, 'Effect of block copolymer nano-reinforcements on the low velocity impact response of sandwich structures', Composite Structures, vol. 110, pp. 174 - 182, http://dx.doi.org/10.1016/j.compstruct.2013.12.001
2014
Barnes RH; Morozov EV; Shankar K, 2014, 'Improved methodology for design of low wind speed specific wind turbine blades', Composite Structures, vol. 119, pp. 677 - 684, http://dx.doi.org/10.1016/j.compstruct.2014.09.034
2014
Chen JF; Morozov EV; Shankar K, 2014, 'Progressive failure analysis of perforated aluminium/CFRP fibre metal laminates using a combined elastoplastic damage model and including delamination effects', Composite Structures, vol. 114, pp. 64 - 79, http://dx.doi.org/10.1016/j.compstruct.2014.03.046
2014
Sayem Uddin M; Morozov EV; Shankar K, 2014, 'The effect of filament winding mosaic pattern on the stress state of filament wound composite flywheel disk', Composite Structures, vol. 107, pp. 260 - 275, http://dx.doi.org/10.1016/j.compstruct.2013.07.004
2014
Ashraf MA; Morozov EV; Shankar K, 2014, 'Flexure analysis of spoolable reinforced thermoplastic pipes for offshore oil and gas applications', Journal of Reinforced Plastics and Composites, vol. 33, pp. 533 - 542, http://dx.doi.org/10.1177/0731684413491442
2014
Morozov E; Shankar K; Mostafa A, 2014, 'In-plane shear behaviour of composite sandwich panel incorporated with shear keys methodology at different orientations: finite element study', Journal of Composite Materials, vol. 48, pp. 2945 - 2959, http://dx.doi.org/10.1177/0021998313503588
2014
Chen JF; Morozov EV; Shankar K, 2014, 'Simulating progressive failure of composite laminates including in-ply and delamination damage effects', Composites Part A: Applied Science and Manufacturing, vol. 61, pp. 185 - 200, http://dx.doi.org/10.1016/j.compositesa.2014.02.013
2014
Yu K; Morozov EV; Ashraf MA; Shankar K, 2014, 'Analysis of flexural behaviour of reinforced thermoplastic pipes considering material nonlinearity', Composite Structures, vol. 119, pp. 385 - 393, http://dx.doi.org/10.1016/j.compstruct.2014.09.015
2014
Thabet A; Shankar K; Morozov EV, 2014, 'Behaviour of PU-foam/glass-fibre composite sandwich panels under flexural static load', Materials and Structures, vol. 47, pp. 1 - 15, http://dx.doi.org/10.1617/s11527-014-0253-3
2014
Thabet AM; Shankar K; Morozov E, 2014, 'Independent analytical technique for analysis of the flexural behaviour of the composite sandwich panels incorporated with shear keys concept', Materials and Structures, vol. 2014, pp. 1 - 20, http://dx.doi.org/10.1617/s11527-014-0331-6
2014
Thabet A; Shankar K, 2013, 'Finite Element Study on the Influence of Shear Key Diameter on the Shear Performance of Composite Sandwich Panel with PU Foam Core', Applied Mechanics and Materials, vol. 376, pp. 103 - 107, http://dx.doi.org/10.4028/www.scientific.net/AMM.376.103
2013
Choi J; Shankar K; Tahtali M, 2013, 'Numerical investigation of corrugated wire mesh laminate', Journal of Engineering (United Kingdom), vol. 2013, http://dx.doi.org/10.1155/2013/470241
2013
Choi J; Shankar K; Choi B; Lee J-H, 2013, 'In-plane shear behavior of corrugated cellular solids and validation of an open-cell corrugated cellular solid', INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, vol. 14, pp. 1767 - 1774, http://dx.doi.org/10.1007/s12541-013-0236-2
2013
Ramakrishnan KR; Shankar K, 2013, 'Experimental and numerical analysis of low-velocity impact of plastic laminates', Fatigue and Fracture of Engineering Materials and Structures, vol. 36, pp. 1153 - 1163, http://dx.doi.org/10.1111/ffe.12099
2013
Thabet A; Shankar K; Morozov EV, 2013, 'Insight into the shear behaviour of composite sandwich panels with foam core', Materials and Design, vol. 50, pp. 92 - 101, http://dx.doi.org/10.1016/j.matdes.2013.03.016
2013
Thabet A; Shankar K; Morozov EV, 2013, 'Effect of shear keys diameter on the shear performance of composite sandwich panel with PVC and PU foam core: FE study', Composite Structures, vol. 102, pp. 90 - 100, http://dx.doi.org/10.1016/j.compstruct.2013.03.003
2013
Thabet A; Shankar K, 2013, 'In-Plane Shear Damage Prediction of Composite Sandwich Panel with Foam Core', Applied Mechanics and Materials, vol. 376, pp. 69 - 73, http://dx.doi.org/10.4028/www.scientific.net/AMM.376.69
2013
Thabet AM; Shankar K; Morozov EV, 2013, 'Experimental, Theoretical and Numerical Investigation of the Flexural Behaviour of the Composite Sandwich Panels with PVC Foam Core', Applied Composite Materials, vol. 21, pp. 661 - 675, http://dx.doi.org/10.1007/s10443-013-9361-4
2013
Shankar K; Thabet A, 2013, 'Investigation on Effect of the Pitch of Shear Keys on the In-Plane Shear Performance of Sandwich Panels with PU Foam Core: FE Study', Applied Mechanics and Materials, vol. 376, pp. 158 - 162, http://dx.doi.org/10.4028/www.scientific.net/AMM.376.158
2013
Choi JH; Shankar K; Tahtali M, 2012, 'Mechanical behavior and numerical analysis of corrugated wire mesh laminates', Journal of Mechanical Science and Technology, vol. 26, pp. 73 - 80, http://dx.doi.org/10.1007/s12206-011-0935-5
2012
Wang C; Shankar K; Morozov EV, 2012, 'Design of Composite Risers for Minimum Weight', World Academy of Science, Engineering and Technology, pp. 54 - 63, http://www.waset.org/journals/waset/v72/v72-11.pdf
2012
Rahman M; Morozov EV; Shankar K; Tahtali M, 2011, 'Simulation of impact response of multilayered panels composed of bonded and unbonded plies', Australian Journal of Mechanical Engineering, vol. 8, pp. 189 - 196, http://dx.doi.org/10.1080/14484846.2011.11464610
2011
Ahmed A; Neely AJ; Shankar K; Nolan P; Moricca S; Eddowes T, 2010, 'Synthesis, Tensile Testing, and Microstructural Characterization of Nanometric SiC Particulate-Reinforced Al 7075 Matrix Composites', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 41A, pp. 1582 - 1591, http://dx.doi.org/10.1007/s11661-010-0201-y
2010
Ahmed A; Neely AJ; Shankar K, 2010, 'Experimental Comparison of the Effects of Nanometric and Micrometric Particulates on the Tensile Properties and Fracture Behavior of Al Composites at Room and Elevated Temperatures', Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, vol. 42, pp. 795 - 815, http://dx.doi.org/10.1007/s11661-010-0505-y
2010
Russo S; Sharp K; Dhamari R; Mills T; Hinton B; Clark G; Shankar K, 2009, 'The influence of the environment and corrosion on the structural integrity of aircraft materials', Fatigue & Fracture of Engineering Materials & Structures, vol. 32, pp. 464 - 472, http://dx.doi.org/10.1111/j.1460-2695.2009.01348.x
2009
Couldrick J; Gai SL; Milthorpe JF; Shankar K, 2009, 'Investigation of Unswept Normal Shock Wave/Turbulent-Boundary-Layer Interaction Control', Journal of Aircraft, vol. 46, pp. 1634 - 1641, http://dx.doi.org/10.2514/1.42104
2009
Hang H; Shankar K; Lai JC, 2009, 'Effects of distributed structural dynamic modification with reduced degrees of freedom', Mechanical Systems and Signal Processing, vol. 23, pp. 2154 - 2177, http://dx.doi.org/10.1016/j.ymssp.2009.03.014
2009
Viot P; Shankar K; Bernard D, 2008, 'Effect of strain rate and density on dynamic behaviour of syntactic foam.', Composite Structures, vol. 8, pp. 314 - 327, http://dx.doi.org/10.1016/j.compstruct.2008.07.021
2008
Hang H; Shankar K; Lai JC, 2008, 'Prediction of the effects on dynamic response due to distributed structural modification with additional degrees of freedom', Mechanical Systems and Signal Processing, vol. 22, pp. 1809 - 1825, http://dx.doi.org/10.1016/j.ymssp.2008.02.006
2008
Moore SM; Lai JC; Shankar K, 2007, 'ARMAX modal parameter identification in the presence of unmeasured excitation - I: Theoretical background', Mechanical Systems and Signal Processing, vol. 21, pp. 1601 - 1615, http://dx.doi.org/10.1016/j.ymssp.2006.07.003
2007
Moore SM; Lai JC; Shankar K, 2007, 'ARMAX modal parameter identification in the presence of unmeasured excitation-II: Numerical and experimental verification', Mechanical Systems and Signal Processing, vol. 21, pp. 1616 - 1641, http://dx.doi.org/10.1016/j.ymssp.2006.07.004
2007
Ahmed A; Neely AJ; Shankar K; Chan SL, 2007, 'Tensile behaviour of nano-particulate reinforced aluminium matrix composites at elevated temperature', Materials Science Forum, vol. 561-565, pp. 761 - 764
2007
Shankar K; Wilson D; Fien AR; Nolan P; Clark RK, 2006, 'Hammer handle testing', New Studies in Athletics, vol. 21, pp. 57 - 66
2006
Couldrick J; Gai SL; Milthorpe JF; Shankar K, 2004, 'Active control of swept shock wave turbulent boundary layer interactions', Aeronautical Journal, vol. 108, pp. 93 - 102, http://dx.doi.org/10.1017/S0001924000005042
2004
Shankar K; Xie HM; Wei R; Asundi A; Boay C, 2004, 'A study on residential Stresses in Polymer Composites using Moire Interferometry', Advanced Composite Materials, vol. 13, pp. 237 - 253, http://dx.doi.org/10.1163/1568551042580181
2004
Couldrick J; Gai SL; Milthorpe JF; Shankar K, 2004, 'Investigation of Active Control of Swept Shock Wave/Turbulent Boundary Layer Interactions using PSP', Aeronautical Journal, vol. 108, pp. 483 - 490, http://dx.doi.org/10.1017/S0001924000000300
2004
Shankar K; Xie HM; Wei R; Asundi A; Boay C, 2004, 'A study on residual stresses in polymer composites using moire interferometry', Advanced Composite Materials, vol. 13, pp. 237 - 253
2004
Couldrick J; Shankar K; Gai S; Milthorpe J, 2003, 'Design of Smart flap actuators for swept shock wave/turbulent boundary layer interaction control', Structural Engineering and Mechanics, vol. 16, pp. 519 - 531, http://dx.doi.org/10.12989/sem.2003.16.5.519
2003
Purry C; Fien A; Shankar K, 2003, 'The effect of corrosion preventative compound on fatigue crack growth properties of 2024-T351 aluminium alloys', International Journal of Fatigue, vol. 25, pp. 1175 - 1180, http://dx.doi.org/10.1016/j.ijfatigue.2003.08.016
2003
Couldrick J; Shankar K; Gai SL; Milthorpe JF, 2003, 'Design of `Smart` Flap Actuators for Swept Shock Wave/Turbulent Boundary Layer', Structural Engineering and Mechanics, vol. 16 (5), pp. 519 - 532
2003
Couldrick JS; Shankar K; Gai SL; Milthorpe JF, 2003, 'GS(7)-33(GSW0058) Structural Design of 'Smart' Actuator Flaps for Control of Shock Wave/Boundary Layer Interaction', The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics, vol. 2003, pp. 312 - 312, http://dx.doi.org/10.1299/jsmeatem.2003.312
2003
Couldrick J; Shankar K; Gai S; Milthorpe J, 2003, 'GSW0058 Structural design of "smart" actuator flaps for control of shock wave/boundary layer interaction', The Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics, vol. 2003.2, http://dx.doi.org/10.1299/jsmeatem.2003.2._gsw0058-1
2003
Shankar K; Dhamari RD, 2002, 'Fatigue behaviour of aluminium alloy 7075 bolted joints treated with oily film corrosion compounds', Materials and Design, vol. 23, pp. 209 - 216, http://dx.doi.org/10.1016/S0261-3069(01)00060-7
2002
Shankar K; Wu W, 2002, 'Effect of welding and weld repair on crack propagation behaviour in aluminium alloy 5083 plates', Materials and Design, vol. 23, pp. 201 - 208
2002
Shankar K; Xie H; Asundi AK; Oh KE; Chai GB, 2001, 'Measurement of residual stresses in polymer composites using Moiré interferometry', Proceedings of SPIE - The International Society for Optical Engineering, vol. 4317, pp. 198 - 203, http://dx.doi.org/10.1117/12.429571
2001

Fracture Mechanics, Fatigue and corrosion of aerospace structures and mechanically fastened joints, Corrosion Fatigue, Composites Testing and Analysis. Impact Damage of Polymeric Foams and Sandwich Structures, Residual Stress Measurement, Adhesively Bonded Joints. Finite Element Modelling, Non-Destructive Inspection, Bio-degradable materials, Polymers, Smart Materials, Structural Vibration and Structural Health Monitoring.

Organisational units
lensSchool of Engineering & Information Technology
Sub Theme
lensAdvanced Materials & Impact Dynamics